How to Install a Good and Correct Home Plumbing Installation

152 View
how to plumb a house

how to plumb a house – Installing clean water pipe installations for homes is a part that cannot be abandoned because it is a complementary or mandatory infrastructure as a livable house.

Planning for clean water installations should be made correctly according to technical rules so that the process of distributing water for household purposes can run smoothly and efficiently.

how to plumb a house

Several important factors in installing house plumbing

Water sources

In this section is to understand where the clean water for your home needs will be supplied. In general, the availability of adequate water sources for household needs is the PDAM pipe network and ground water.

After you determine the appropriate type of water source, you can plan the installation of water pipes more carefully, for example: if you use PAM water sources, of course you will be given a distribution line from the pipes provided by the PAM manager and you are prohibited from modifying the pipe size or change it yourself.

The use of groundwater in the sense of making your own well and installing a water pump, will make it easier for you to manage your water needs as long as the water source is always available and does not run dry.

Installation Model

There are two types of clean water pipe installation models that you can apply by adjusting the field conditions and the availability of budget funds.

  • Closed System. This type of pipe installation is also known as a circular connection, meaning that all ends of the pipe are connected without breaking. The advantage is that it makes the water pressure stronger and when a water faucet is opened simultaneously it will get the same water discharge. 
  • Open System. With a lower cost, this type of water pipe installation if the planning is wrong, there will be many problems in the future such as water discharge that is not the same from one faucet to another, and if there is damage at a certain point it will make some distribution lines totally dead without get a water supply.

Installation Location

According to the technical procedure for installing clean water lines, there are two methods that can be chosen, namely embedded and attached installations. For those that are embedded, of course, they will look neater because they are in the ground or walls, but it will also be difficult if there are repairs or maintenance later.


Currently, the choice of water channel installation materials is very diverse, starting from metal (iron), PVC and the most expensive is stainless steel which is considered very safe from corrosion.

Each of these materials also has advantages and disadvantages from a different technical point of view depending on the location of the work in the field or according to other supporting procedures.

Read also


Check out other designs directly from your cellphone via WhatsApp Channel:

Leave a Reply

Your email address will not be published. Required fields are marked *