Beautiful houses for a well - 115 photos of ideas for arrangement and examples of design of wells
A well on the site is needed to store water. So that it is protected from debris and from direct exposure to the rays of the sun and other contaminants, a well house is provided.
It is necessary not only for protection from dirt, but also for safety precautions, protecting animals and children coming to the well. You can buy a ready-made house right away, which will be quite expensive.
And you can also build a house for a well with your own hands. This option will be the best, since it does not require financial and time costs and efforts.
What is a well house for?
Before making a house for a well, you need to understand what it is intended for and what functions it provides.
Of course, the main task is considered to be the protection of well water from dust, dirt, leaves, insects and anything that can make it unsuitable for use. The correct construction of the house protects the well from freezing in winter.
Also, the structure of the house becomes a protective element that protects children and animals from any unfortunate accidents.
The house is also an irreplaceable part of the decor of the well, and of the entire site as a whole. Its harmonious design in relation to other objects of the territory will turn it into a real decorative masterpiece.
Well house designs are available in several variations. They differ in the type of the well itself and in the material. There are these types of houses:
The roof house is the easiest to build, it is represented by a triangular gable roof.
Small house design with a rectangular frame and a roof. Quite a complicated construction. The base is round when it is made of concrete rings.
A gazebo house looks very original if it has an open rather than a closed building structure. The basis is very different in implementation.
Roofs also come in different shapes: symmetrical, asymmetrical. Therefore, houses with the same frame, but with a different structure and design of the roof can be completely different.
The drawing of the house for the well and its subsequent construction depend on the selected design.
It is also necessary to take into account the dimensions of the well during construction, since the dimensions of the house for the well must correspond to it.
A large house will make the use of the well less convenient, and structures with a small roof cannot protect it from all kinds of dirt.
Materials for houses
Various materials can be used to make houses:
- Wood. I use it more often, the base and the roof of the house are made from it at once. You can use logs, boards or timber. This material is environmentally friendly, affordable and durable.
- Natural or decorative stone. The base is made from this material. And the roof on such buildings is made of tiles. This gives the "medieval effect".
- Cink Steel. The galvanized steel structure is quite simple to perform, but at the same time it has a less attractive appearance.
Another disadvantage of choosing this material is that it needs additional insulation, otherwise the water in the well will freeze.
How to build a house for a well
The construction of the house begins after taking measurements of the well. They will be the dimensions of the frame. Its base frames are made of 8 × 10 cm beams.
To make the structure stronger and stronger, you need to drive in nails 10 cm in size. From the upper part of the base, 2 racks are brought out to a height equal to the height of the future house.
After that, rafters are made of beams, cutting their edges at an angle of 45 degrees, and making grooves in them to connect to the higher frame. Installing crossbars and jibs will give the roof strength.
If your structure has a base in addition to the roof, then it must be covered with boards, the same can be done with triangular roof sides.
Bucket lifting collar. It is made from logs by removing the bark and polishing it. The length is needed 3-4 cm less than the distance of the racks, otherwise, while scrolling, it will cling to them.
In the middle of the log cabins, grooves are drilled, in the racks or walls of the base too. After that, metal rods are fixed in these grooves, beforehand, in order to save the structure from premature wear due to friction of the elements in the grooves, metal bushings are installed. After that, you can attach a chain with a bucket to the gate.
Roof. A crate is made on the frame, after which it is covered with roofing material or tar paper to isolate from moisture. Then the roofing works begin. Roofing material can be used slate, shingles, etc.
Door. For it, you need to form a shield of boards corresponding to the diameter of the well. You can attach it with loops.
The final part of the work is the decorative design of the well. Wooden products can be decorated with carved elements. The decor depends only on the imagination and wishes of the owners of the infield.
A well is not just a place for storing water resources, but also an original decoration of a courtyard or garden. It is easy to build and decorate a house for a well yourself, and in order to pick up ideas and find inspiration, you can see a photo of houses for a well.